Get the shoe sizing right. Get the boot width right. Enjoy work!
When it comes to buying work boots, the sizing can be crucial to your comfort and safety. While there is no one-size-fits-all answer, it's generally a good idea to consider the following factors when determining the size of your work boots:
Toe Room: Work boots should provide enough room for your toes to move comfortably. Your toes should not be cramped, as this can lead to discomfort, blisters, and foot issues. On the other hand, if your boots are too big, your feet may slide around, causing friction and discomfort.
Sock Thickness: Consider the thickness of your work socks you'll be wearing with your work boots. If you typically wear thick, insulated socks, you may need slightly larger boots to accommodate them. However, if you wear thin socks, you might want a snugger fit.
Foot Swelling: Keep in mind that your feet can swell throughout the day, especially if you're on your feet for extended periods. Buying boots that are slightly larger can provide more comfort during these times.
Arch Support and Width: Pay attention to the arch support and width of the boots. Ensure that the arch of the boot aligns well with the arch of your foot. If you have wider feet, you might need safety boots with a wider width.
Brand and Model Variations: Different brands and models may have variations in sizing. It's important to try on boots from the specific brand and model you're interested in, as their sizing can differ. Bear in mind that ELTEN work boots run large and by the rule of thumb you'd need to go down one size compared to the Australian work boot brands. How to measure your feet? Click HERE
Insoles: You might consider using custom comfort insoles or orthotics. These can take up some space inside the boot, so you may need slightly larger boots to accommodate them.
It's important to measure your feet and try on thesteel caps in the store, if possible. Don't rely solely on the size marked on the boot, as sizing can vary between brands and models. Walk around in the boots to ensure they provide the right balance of comfort and support. If you're buying online, check the seller's return policy to make sure you can exchange the boots if they don't fit correctly.
In summary, the ideal sizing forsafety footwear may vary depending on your specific needs, so it's essential to strike a balance between providing enough room for comfort and avoiding excessive looseness.
Feel free to contactour friendly customer service team in Melbourneon 03 6161 3933 or hello@stitchkraft.co or visit our store on www.sitchkraft.com.au for any further queries you have aroundcomfort fit in your steel or composite toe cap bootsor our huge range of ELTENwork boots and safety shoes onwww.stitchkraft.com.au.
FAQs
Toe Room: Work boots should provide enough room for your toes to move comfortably. Your toes should not be cramped, as this can lead to discomfort, blisters, and foot issues. On the other hand, if your boots are too big, your feet may slide around, causing friction and discomfort.
Should work boots be a size bigger? ›
First, take accurate measurements of your foot, and then try on some different boots to decide what gives your foot the best comfort and support. A well-fitting work boot should be a little roomy. Boots that fit too snugly will constrict your foot and make you uncomfortable at work.
Is it better for boots to be a little big or a little small? ›
If the rest of your foot feels comfortable, it's recommended that you have around a quarter to a half-inch of slippage to give your foot room to move and flex as you walk. At the front of the boot, you should have enough room to wiggle and move your toes without them slipping around too much.
Should you size up when wearing boots? ›
If your feet are a narrow width (and no narrow sizes are available to purchase), you may need to order a 1/2 size smaller than your normal size. If your feet are a wide width (and no wide sizes are available to purchase), try ordering a 1/2 size larger than your normal size.
Should work boots be tight or loose? ›
Conclusion. Work boots are not supposed to be tight in the sense of causing discomfort or restricting movement. They should fit snugly, providing support and stability without constricting the feet. Remember, the right fit is essential for comfort, safety, and the longevity of your boots.
Should we buy 1 size bigger in boots? ›
1. You should order your usual shoe size, or one size less than your usual sneaker size. 2. Before trying on the boots, make sure you do it on a carpet or soft surface, because if you do it on the floor, they may scratch or stain and you will not be able to change them.
How to tell if work boots are too small? ›
Your toes should have about half an inch of room in front of them so your toes aren't completely pressed against the front of your boots, but they shouldn't slide forward as you walk and hit the front of the toecap. Having too large boots can also increase your risk of tripping and can be clumsy to work in.
How do you tell if your boots are too big? ›
Generally speaking, there should be about one finger's width of space between your longest toe and the end of the shoe. Another way to check this is to slip a finger between the heel of your foot and the heel of your shoe. There should be just enough space for your finger to fit nice and snugly.
How much room should you have in work boots? ›
Toe Room: Your toes should have enough room to move freely without feeling cramped or squeezed. There should be about a half-inch of space between your longest toe and the front of the boot.
Should I go up a shoe size for boots? ›
Since many boot styles naturally have a stiffer toe box than standard shoes, it's harder to gauge the fit of a boot based on the toe box alone. Of course, if your toes feel crammed up against the front of the boot or alongside the edges of the toe box, you'll want to go for a larger size or wider fit.
Length: Your toes should have enough room to wiggle comfortably, but not too much. Aim for about a thumb's width of space between your longest toe and the end of the boot. This ensures your toes have enough breathing room without sacrificing a secure fit.
Should boots be tight when you first buy them? ›
Check the initial fit.
Seat your heels firmly into the heel cups of the boots, lace them up and stand up. They should feel snug around the ball and instep of your foot, but loose enough that flexing your foot forward is not uncomfortable.
Is my boot size the same as my shoe size? ›
Generally, boots may fit slightly differently than regular shoes, but many brands make footwear in the same sizes. It is best to try the boots on in person when possible to ensure the best fit.
How many sizes bigger should boots be? ›
Generally speaking, there should be about one finger's width of space between your longest toe and the end of the shoe. Another way to check this is to slip a finger between the heel of your foot and the heel of your shoe. There should be just enough space for your finger to fit nice and snugly.
Should you size up or down in safety boots? ›
Generally, safety shoes and boots are manufactured to be slightly more generous in terms of size depending on the style, so there may be no need to size up. Don't automatically assume you will need to size up to accommodate thick socks as this could mean they're too big, becoming a trip hazard.
