May 10, 2021
Hint: one of the best ways to avoid common mistakes in homemade fudge is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade fudge is a creamy, delicious treat. Chocolate fudge is a standard favorite, and there are countless variations and flavor combinations that bring some excitement to the world of homemade fudge. Although some recipes seem relatively straightforward, many home cooks have trouble creating the perfect fudge from scratch. In this blog, we discuss some of the most common challenges people face when making homemade fudge. Of course, one of the best ways to avoid these missteps is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade Fudge Doesn’t Always Set
Traditional fudge is made by heating sugar, butter, milk, and other ingredients until the mixture reaches the soft-ball stage. Home cooks usually use a metal saucepan to do the job, with the final hot mixture spread into a casserole dish or sheet pan to cool. However, homemade fudge doesn’t always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn’t firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn’t reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.
Cooking in High Humidity Can Cause Problems
Just as altitude can create complications when baking, high humidity in the kitchen can lead to significant setbacks when making fudge. Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn’t feasible, you’ll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!
Why Homemade Fudge Becomes Grainy
Even if your homemade fudge sets up to a nice firm consistency when cooled, you can still run into texture problems. Fudge becomes grainy and sugary when prepared incorrectly. Unfortunately, this is a common issue. To avoid grainy fudge, make sure that the sugar in your mixture dissolves entirely. This can require adjustments to your recipe or stirring technique.
How to Avoid Burning Your Fudge
As with any other confectionery endeavor, burning your fudge is a distinct possibility. Use a heavy-bottomed saucepan (some folks swear by copper pots) and stir the mixture constantly. Never leave your fudge unattended, and make sure to scrape the side of the pan as you stir. It’s hard (if not impossible) to save a burnt batch of fudge. Still, stopping by your nearest Wockenfuss Candies store is a surefire way to save the day!
A Wide Selection of Delicious Treats from Wockenfuss Candies
Head to WockenfussCandies.com and browse our wide selection of chocolates and candies; we promise you won’t be disappointed! Wockenfuss Candies is one of the oldest candy makers in Baltimore. We opened our doors in 1915 and have proudly served the people of Baltimore ever since. If you have any questions about our wide selection of chocolates, please contact Wockenfuss Candies by calling 1-800-296-4414 or email info@Wockenfusscandies.com. When you’re not savoring our sweets, stay satisfied by following us on Facebook, Twitter, and Pinterest!
This entry was posted on Monday, May 10th, 2021 at 2:21 pm.You can skip to the end and leave a response. Pinging is currently not allowed.
FAQs
As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.
What not to do when making fudge? ›
Avoid Stirring Once the Mixture Comes to a Simmer
Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.
What is the secret to good fudge? ›
You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).
What are the common mistakes you encounter during your activity in candy making? ›
7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
- Using the Wrong Pan. All candy and confections start by melting sugar. ...
- Stirring the Sugar. ...
- Not Using a Candy Thermometer. ...
- Leaving Out the Parchment Paper Lining. ...
- Skipping the Cooking Spray. ...
- Scraping the Pot. ...
- Using a Cold Knife to Slice.
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.
Why did my fudge turn out like taffy? ›
If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).
Do you stir fudge when it's boiling? ›
Know When and When NOT to Stir
Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.
What to do with failed fudge? ›
My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.
What does cream of tartar do to fudge? ›
Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!
Why shouldn't you stir fudge after it reaches the correct temperature? ›
Sugar Crystals Formed
It's important to beat the fudge ingredients to develop the right texture, but you won't get smooth, creamy fudge if you beat it when it's too hot. Beating fudge when it's still over heat creates sugar crystals, aka the grittiness you feel in the fudge.
Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.
Is evaporated milk or condensed milk better for fudge? ›
Use Evaporated Milk- Make sure to use evaporated milk and not sweetened condensed milk. If you accidentally use sweetened condensed milk your fudge will be incredibly over the top sweet. Cut up the Butter– Before adding the butter in make sure to cut it into smaller pieces for faster melting.
Why is my homemade candy grainy? ›
Why is my hard candy grainy and not smooth? The problem is that crystals of sugar were re-introduced into the liquid candy. This will cause your candy to crystallize and become grainy.
What is the most common problem in making candy? ›
Not Controlling the Crystals
The main goal in candy making is to control the formation of sugar crystals. If you have a lot of sugar crystals forming on the sides of the pan, your candy will be too grainy. Always stir gently to avoid splashing the candy mixture onto the sides of the pan.
What are the four main interfering agents in candy making? ›
Large amounts of interfering substances such as fat, cocoa butter, concentrated milk products, and/or corn syrup are added to the sugar syrup.
Why would fudge not set up? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
What happens if you over stir fudge? ›
Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.
How can you tell if fudge is bad? ›
If fudge experiences a change in temperature, it can melt or develop a slimy texture on the surface. If it is exposed to air, it can dry out and become hard. Specific add-ins to fudge have the potential to grow mold or give off a bad odor, and at that point, the fudge should be avoided.
